Series PVA Heavy Duty Pinch Valve

Series PVA: Reliable Flow Control for Demanding Applications

Cost-Effective Pinch Valve Performance for Abrasive and Corrosive Media

The Bray Series PVA Pinch Valve provides reliable on/off isolation, modulating control, and fixed-flow positioning for demanding industrial services. Its simple, robust design features a heavy-duty tri-layer elastomer sleeve with full-length reinforcement and quick-response lifting tabs that help the sleeve reopen as the pinch bars move to the open position.

Available in open and enclosed body styles, 16-bar and 25-bar pressure ratings, and sizes from 1/2 inch through 36 inches, the Series PVA supports a variety of regional flange-drilling patterns and sleeve materials. Actuation options include handwheel, bevel gear, pneumatic cylinder, hydraulic cylinder, and electric motor configurations for both on/off and modulating service. Designed for applications involving slurries, powders, sludge, acids, alkalis, and other challenging media, the Series PVA delivers dependable performance across mining, power, chemical processing, water and wastewater, pulp and paper, food and beverage, pharmaceutical, battery manufacturing, and recycling industries.

Especificaciones

Rango de tamaños

NPS 1/2 a 36 | DN 15 a 900

Rango de temperaturas

Presión operativa máxima permitida

Open Body 232 psi | 16 bar
Enclosed Body 232 psi | 16 bar & 363 psi | 25 bar

Tipo de cuerpo

Open Body
Enclosed Body

Diseño de Válvula

ISA 75.10.01
Manufacturer standard

Clasificación de cierre

Cero fuga

Cara a cara

ISA 75.10.02
Estándar del fabricante

Ensayos estándar

Estándar del fabricante

Materiales del cuerpo

Ductile Iron, Carbon Steel, WCB Stainless Steel CF8, Stainless Steel CF8M

Materiales del vástago

Chrome-plated Steel, Stainless Steel

Opciones de actuador

Handwheel, Bevel Gear, Pneumatic Actuator, Electric Motor

Descargas

Designed to ISA 75.10.01 with face-to-face dimensions per ISA 75.10.02, supporting dependable integration into industrial piping systems.

Heavy-duty tri-layer sleeve construction provides reliable performance in abrasive and corrosive services.

Full-length sleeve reinforcement supports durability and extended service life.

Quick-response lifting tabs help the sleeve reopen as the pinch bars move to the open position.

Available with Natural Rubber, Buna-N, EPDM, CSM, FKM, and Chlorobutyl sleeves to accommodate a broad range of temperatures and process media.

Handwheel, gear, pneumatic, hydraulic, and electric actuation options support on/off and modulating service.

A. Robust Heavy Duty Sleeve

Features a triple layer reinforced construction to deliver extended service life.
B. Full-Bore, Unobstructed Flow Path

When fully open, the full-bore design offers no resistance to line media and no external leak paths.
C. Quick Response Lifting Tabs

Enable quick opening, even in low pressure applications.
D. Sleeve Material Options

Available to handle a wide range of applications, from abrasion resistance to chemical compatibility
E. Open Or Enclosed Body Designs

Available to meet installation and operation requirements.
F. Actuation & Control Options

Including Manual, Pneumatic, Hydraulic, Or Electric Operators With Positioners, Switches, Solenoids, And Filter Regulators.

Open Body Design

Open Body, Handwheel

Pressure Rating: 232 psi | 16 bar

Enclosed Body Design